WATER SEPERATOR FOR PE-RT PIPES LINE

Chengda raised temperature resistant polyethylene (PE-RT) pipe ---- the raise temperature resistant polyethylene total plastic pipe system with excellent performance, as the advantages of excellent hydraulic pressure resistant performance and special construction, it becomes the best in the low temperature hot water floor radiation heating pipes.

1.Properties of Chengda PE-RT pipe
1. Light weight: easily transported and installed.
2.The excellent flexibility makes convenient and convenient when paving, the pipe can decrease the consumption of the pipe fittings by coiling and bending and so on methods, decreasing the construction cost;
3.When the pipe is bent, the stress of the bent part will loose quickly, it is not suitable to appear [back", convenient for construction operation, so it can prevent that as the stress concentrates in using process the pipe will break down in bending place;
4.The friction loss in pipe is low, the transporting fluid ability of this pipe is 30% more than the metal pipe with the same diameter,
5.Low brittle rupture temperature, the pipe material has excellent low temperature resistant performance, so it can construct under the consideration of low temperature in winter, and there is no need for preheating, which can solve inconvenience that it is too cold to construct in the north area of our country, Good chemical corrosion resistance, no rust, long lifetime;
6.Hot-melting connection, forming full closed seepage prevention system;
7.Good environment suitability
8.Under normal condition, the pipe can be used safely for 50 years;
9.Good resistance to impact performance;

10.Good heat dispersion, a lot of energy can be saved in the heating application.

2. The raw materials for production

The raw material of the Chengda PE-RT tubing is the polyethylene XZ89830.00 which is produced by the USA Dow chemical company. This raw material has particular molecular structure. It talks the linear ethylene as main chain, with the controllable branch, so it has excellent hydraulic pressure resistant performance. The XZ89830.00 can be connected by radiation without any cross-linking agent. The tubing performance after cross connection will exceed the requirement of the DIN16894 (PE/MD-X). The pipe from XZ89830.00 is smooth in inner and outer wall, which can decrease stopping as the piling up of the leftover in water. At the same time, the pressure loss in the transportation process is also decreased. Secondly, the PE-RT series product has no need for the cross connection technique, avoiding the trouble that the cross polyethylene controls the cross degree and uniformity.

3. Product specification
The Chengda PE-RT floor heating pipe has three series according to the sizes, which are S5, S4 and S3.2. Each series has four products: ø16, ø20, ø25, ø32.

Contact us if you need more details on Plastic Pipes for Underfloor Heating. We are ready to answer your questions on packaging, logistics, certification or any Other aspects about Underground Heating Pe-rt Pipes、Pe-rt Plastic Pipes. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : FRP tubular membrane housing > PE-RT Pipes And Fittings